Electronically Programmable Four Heads Automatic Coil Winding Machine With PLC
Description
Electronically Programmable Four Heads Automatic Coil Winding Machine With PLC ZPX250-4 is a high efficiency coil winding machines, it can wind four same specifications of coils at once. The winding machine is composed of main winding unit, wire laying unit, insulation decoiler unit, pneumatic system, and so on. The wire guide is driven by a servo motor to assure the wire laying precision. The touch screen is very easy for inputting all necessary parameters. This machine features slow starting, smooth running, strong pulling force, high automation, full function.
Main Components
1. Main steel welded frame,
2. Main winding unit, 7.5kw motor provides strong pulling force
3. Automatic wire arrangement system, driven by servo motor
4. Control system, based on PLC
5. Pneumatic system
6. Foot pedal, can be used to switch the rotating direction
7. Touch screen, it is very easy to operate
8. Linear guide
9. VFD
Technical Parameters
Typical standard specifications of ZPX250-4 are shown below, however these can be easily modified as requested.
| Shaft Height from Floor: |
900 mm |
| Square Shaft Size: |
40*40*1200 mm |
| Round Wire Diameter: |
0.3-4.0 mm |
| Flat Wire Size Max.: |
3x10mm |
| Max. Finished Coil OD.: |
600 mm |
| Max. Each Coil Length: |
250 mm |
| Insulation Decoiler Number: |
1 pc |
| Main Motor Power: |
7.5 kw |
| Rotating Speed: |
0-160 rpm |
| Speed Regulation: |
Variable frequency and stepless speed regulation |
| Control system: |
PLC |
| Automatic Spread Pitch: |
Min. step: 0.01 mm |
| Counting Mode: |
5-digit counting |
| Max. Turns Preset Number: |
9999.9 |
| Counting Turn Range: |
0 - 9999.9 |
Product Tags:
|
|
Four Heads Automatic Coil Winder Electronically Programmable High Efficiency Images
|
